
Going for SK6812
After having changed the jet a few times and the final(?) version is being printed. More LEDs per meter look way better and having invested that much time at the moment it would be a shame not to do it.
More LEDs
Why, short answer it looks way better.
But it does have some consequences…
5V instead of 12V
The LEDs will be powered by 5V instead of 12V. You might think that less current will be used, but the number of LEDs will also (roughly) double from 60 to 144 per metre.
The ESP and WS2812B (on the PCB) need to be powered by 5V, so the 12V needs to be stepped down. A quick measurement shows that the ESP and WS2812B draw around 78mA; a 7805 regulator should be perfectly capable of handling this, if necessary with a small aluminium strip. Or, if I’m going to make a PCB anyway, a copper pad beneath the 7805. According to the documentation, this pad is connected to the middle pin, which is also GND.
The advantage of a 7805 is that it does not generate any additional noise. This means that the 2.4 GHz frequency is not interfered with either. A step-down converter would, however, cause this, and the circuit would also become considerably more complicated.